To do this follow these steps: 1. Turn off your phone, and then switch it back on after 10 seconds. Press and hold down the Multi-Function button again to turn off the device. The Blueant device is now reset. Upon turning it back on, it will ask you to choose your language and to proceed to the pairing mode. Was this answer helpful? Yes No. Someone said: This worked. Thanks heaps. Was this comment helpful?
Someone said: Fantastic, this worked a treat - Thanks Now I am going to try and crack the code to make calls without touching my phone! Someone said: Very helpful Fixed the problem. Someone said: Fantastic! Thank you so much, it worked YAY! So very helpful! Someone said: yep, that does the trick! Someone said: Great - worked!!! Was anot able to pair my new Galaxy S7. Thank you. Someone said: It worked. Fixed the problem. This answer closely relates to:. You will not lose any apps, data, music, movies, settings, etc.
You will be warned that all data apps, music, movies, etc. Again, say "yes. Upon pairing the phone to an Android phone make sure that the Supertooth is turned off While the Supertooth is off. Press and hold the Multi function button and wait until the light starts flashing. Select the the language and it will be on pairing mode then go to your phone and pair the BlueAnt.
If you are not able to pair it to your phone. Try to pair it on another Android phone and check if it does the same problem. You can transfer files contacts from the PC into your device. Connect your device into the PC to be transfer it.
That's not novel in and of itself, since plenty of devices let you stream music and podcasts. The S4 also hooks into Microsoft's BING service, for delivering voice-enabled stock quotes, movie times, weather information, sports scores, news, and traffic updates. This was a little clumsy in practice; often I found myself saying "News" once to the S4, only to have to say it again to Bing once it connected. It also took a pretty long time, including numerous voice commands, to navigate to what information I wanted.
Other details: the S4 charges in about four hours, and it lasts for up to 20 hours of talk time on a single charge. With about a month of standby time, you can leave it powered up in the car; each time you get in the driver's seat, the unit pairs automatically with your phone.
Should a firmware update ever become necessary, you can do so online. The Android app checks automatically for S4 firmware updates, but it can't install them; you'll need a PC or Mac for that. There are other, less expensive hands-free speakerphones on the market. Many newer model cars offer hands-free Bluetooth that works with the in-car stereo. But the S4's voice-recognition and text-to-speech capabilities put it in a class of one, at least on the standalone hands-free speaker side.
As long as you don't mind that passengers hear your conversation with you, the S4 is more comfortable and more enjoyable to use than having to wear a Bluetooth headset. If I didn't already have Bluetooth in my car, I'd buy one for myself. More Headset Reviews:. Excellent 4. Bottom Line The BlueAnt S4 is an excellent-sounding, voice-enabled, hands-free speakerphone that's a must buy for anyone sick of wearing a Bluetooth headset in the car.
Pros Good sound quality. Effective voice recognition. In the US, this function dials the Bing service. Call charges may apply to this call.
Depending on your phone model, you may need to record voice tags on the phone to use this feature. When the LEDs are set to off, they still light up when you turn the S4 on or off, but will not fl ash at other times.
If you add contacts to your phone, or change the numbers associated with existing contacts, then you will need to use this command to transfer the updated contacts to the S4.
To do this, the S4 needs to store a copy of your phonebook contacts. Automatically Transferring your Phonebook Contacts to the S4 When you pair your phone with the S4 it will attempt to transfer the phonebook contacts automatically. The S4 stores up to 2, contacts per phone. Manually Transferring your Phonebook Contacts to the S4 Some phones do not support automatic phonebook transfers: if this is the case on your phone then the S4 will instruct you to start sending contacts to the S4 manually.
To do this: 1. Wait to be prompted to start sending contacts to the S4. Updating your Phonebook Contacts on the S4 If you add or change entries in your phonebook then you need to update the contacts on your S4 by doing the following.
Say Update Phonebook. If this is not possible on your phone then you will be prompted to upload the contacts manually. If your phone supports the A2DP profi le then simply start playing music or any other audio including turn-by-turn directions from a GPS application on your phone and it will automatically transfer to the S4. The audio will resume when the call ends.
The S4 will ask you to Say A Command. If you do not say a command within a few seconds the music will resume playing. Swipe your fi nger across the top of the S4 to adjust the volume. You can adjust the volume during calls, during music playback and you can also adjust the volume of the audio prompts. Please note that each of these modes has its own independent volume setting. Any currently connected phone will be disconnected during pairing, so you will need to reconnect afterwards.
Which Phone is Used for Calls? When you have two phones connected to the S4 at the same time you can always answer an incoming call on either phone. If you initiate a call through the S4 for example by saying Phone Commands then the call takes place on the primary phone: the one that connected to the S4 fi rst. Tip: If you are using multipoint, both phones remain connected during calls so you can also use these controls to switch between calls on both phones. Switching the S4 On and Off To switch the S4 on or off, use the hardware power switch located on the side of the device.
In this mode the S4 will only listen for the trigger phrase for 2 minutes after you do something. Resetting the S4 will clear all the stored pairing settings on the S4 , delete any stored contact details and put the device back into pairing mode. To reset the S4 : 1. Delete any existing pairing information from your phone and turn it off and back on again to refresh the phone memory.
Make sure the S4 is switched on but not connected to any phones. Now turn the S4 off and back on again. You will now need to pair your phone with the S4 again. If your phone does not support any of these Bluetooth profi les, then you will not be able to copy your contacts to the S4.
If you are having problems transferring your phonebook to the S4 , please see our knowledgebase on www. This contains extensive troubleshooting tips for phone-specifi c issues relating to the phonebook transfer process. If this is happening, you can resolve it by changing the setting on your phone that controls the display and sort order of your contacts. If this is the case the S4 will read the names in whatever order it receives from the phone. If you add a number to your phonebook after pairing, then the S4 will not read out the name associated with this number unless you use the Update Phonebook command to update the phonebook details on the S4.
The S4 Reads Out the Wrong Name If the S4 is reading out the wrong name then it is likely that you have changed the contacts in your phone without updating the contacts on the S4. If you make any changes to your phonebook, use the Update Phonebook command to copy these changes to the S4. The S4 can store up to 2, phone numbers for each paired device.
For example, if you have a business, home, and mobile number stored for one of your contacts, then this counts as 3 separate entries. For example, if you have the car radio at a very high volume, this may interfere with the operation of the handsfree trigger. If the green light is off, tap the symbol to activate the S4 , instead of saying the trigger phrase. This setting determines how precisely the words that you say need to match the speech patterns that the S4 has been confi gured to recognize.
You can change it by using the Sensitivity Level command. Cancel pairing mode Tap the symbol Pairing mode. Answer a call Tap the symbol Phone ringing. End a call Tap the symbol During an active call. Press the - symbol for 1 second Active call with ringing incoming call. BlueAnt Please contact us before returning the S4 to a store and we will help you through any diffi culty you may have. Prolonged use at high volumes may affect your hearing capacity and may result in noise induced hearing loss NIHL.
BlueAnt and other trademarks are trademarks of BlueAnt and other organizations and may not be used without permission. Visit www. All Rights Reserved. Short-link Link Embed. Share from cover. Share from page:. More magazines by this user. Close Flag as Inappropriate. You have already flagged this document. Thank you, for helping us keep this platform clean.
0コメント